IÂ´m running a Thecus 5200 firmware 2.00.10 with a Twonkymediaserver Module 2.00.12
(i.e Twonkymedia Version 4.4.9)
My netgear mp101 works really fine really fine since I did set it manually to the rtp option in the clients settings menue on the twonky server. Maybee a similar approach would help in my case with the steamium 400i described below, just he option is not offerd (jet?)
And just try various clients in the house, especially the Streamium 400i seems to be my current favourite under those U get relatively cheap , and run stable (I only use wired connections).
Just I do have the sms style problem (wich means there is no search)
.Also it is important to have the player and the server set to the same language.
The workaround described below works 4 me.
the problem has finally been found.. It'll be fixed in v5 beta 2 or a maybe-to-be-released 4.4.6
version. A quick fix for all other twonky-media versions is:
Point your webbrowser to http://
and restart the media server (e.g. with /rpc/restart).
By doing this, the "X_BrowseByLetter" capability of the Twonkymedia Server will also be enabled.
Now since iÂ´m running a version higher than the one where the problem was supposed to be tackeld, i wander wether there is an option to put a commandline into my regular startuproutine (like in autostart) since I do have to restart the server quite often , especially since the system somehow does not accept the -1 value 4 continous monitoring of changes, but sets itself to 60 minutesâ€¦.
IÂ´d appreciate every hint.
Thanx a lot.